Rover P6 schemes

Rover P6 scheme

Instructions for Rover P6
Drawing Hole Location Tube number Notes

Treatment at floor

A 1 triangle Headlamp housing 1

A 16 open star Bonnet 1

B 2 Doorpost 1

B 3 closed star Doorpost 1

B 4 Doorpost 1

C 6 / Doors 1+4

D 5 Boot beam 1

D 7 Crossbar over rear axle 1 Remove trim and cover plate. Spray in existing hole under cover plate

D 17 Rear transverse panel section 1

D 18 triangle Rear wing behind wheelbox 5 Remove rear light before wash and wash the area

Treatment at lift

E 8 Forward cross member 1

E 9 Outer cross member 1

E 10 Forward longitudinal beam 1

E 11 Front wing 1

E 12 open star Inner valance 1

E 13 Upper shock absorber mount 1

E 14 triangle / Rear side rails 1

E 15 Side panels 1

E 19 Front panel 1

E 20 Outside valance 1

E 21 Cross member 1

E 22 Reinforcement over rear axle 1

Instructions for Rover P6
Drawing	Hole	Location	Tube number	Notes
Treatment at floor
A 1		Headlamp housing	1
A 16		Bonnet	1
B 2		Doorpost	1
B 3		Doorpost	1
B 4		Doorpost	1
C 6	/	Doors	1+4
D 5		Boot beam	1
D 7		Crossbar over rear axle	1	Remove trim and cover plate. Spray in existing hole under cover plate
D 17		Rear transverse panel section	1
D 18		Rear wing behind wheelbox	5	Remove rear light before wash and wash the area
Treatment at lift
E 8		Forward cross member	1
E 9		Outer cross member	1
E 10		Forward longitudinal beam	1
E 11		Front wing	1
E 12		Inner valance	1
E 13		Upper shock absorber mount	1
E 14	/	Rear side rails	1
E 15		Side panels	1
E 19		Front panel	1
E 20		Outside valance	1
E 21		Cross member	1
E 22		Reinforcement over rear axle	1

See general instructions for symbols etc..

Last update 23.2.2006